Standard Equipment
Boring bar with pre-machined cutter
holes for main and cam bore operations
Bar clamp collar ‘end stop’ for dial-in procedures
2 main bushing assemblies w/air clamping
and horizontal/vertical bar adjustment
Set of Main-Bore/Cam-Bore adaptor plates
2 pair transfer plates for boring bar or 2’ main
bar, for adding additonal mounting holes
Pair of ‘dial-in’ indicators, .0005” graduation
and bar fixtures for accurate locating of bar
Hinged tool collar for ‘set once – cut all’ tool
bit setting for larger bores
Solid carbide tool bit for roughing ops in large bores
Solid carbide tool bit for cambore operations
Two indexable tool holders for finishing operations
Set once–cut all special toolbit collar for tool
bit setting on smaller bores
5 indexable carbide inserts for finish bore in cast or aluminum
5 indexable carbide inserts for finish boring in steel
LBG1 tool setting fixture w/.0005x1” guage; 1.5” to 3.5” range
Pair of 1.99” o.d. intermediate bushings for LBS 1 bar support
or, in 2” i.d. main centering rings
LBS1 universal, self-aligning bar support
LBG3 snap gauge kit for comparitive measuring with bar in place
All necessary air lines, fittings; 1 air regulator
